Con el squid creo q no hay que hacer nada raro, solo redireccionarle el
trafico, buscando por internet encontré este ejemplo.

int_if = "fxp0"
ext_if1 = "em0"
ext_if2 = "em1"
ext_gw1 = "11.22.33.44"
ext_gw2 = "55.66.77.88"

pass in on $int_if route-to \
{ ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
proto tcp from $lan_net to any flags S/SA modulate state

En está linea esta la parte del balance.

El 5 de noviembre de 2009 16:40, polken <carlos_albin...@yahoo.com.mx>escribió:

que tal...

te comparto mi configuracion
aqui va el balanceo y el squid transparente

en el pf.conf

ext_if1 = "fxp0"
ext_if2 = "dc0"
int_if  = "dc1"
int_net = "10.0.0.0/16"
ext_gw1 = "192.168.1.254"
ext_gw2 = "172.16.0.10"

nat on $ext_if1 from $int_net to any -> ($ext_if1)
nat on $ext_if2 from $int_net to any -> ($ext_if2)

rdr on $int_if inet proto tcp from any to any port 80 -> 127.0.0.1 port 3128

block in from any to any
block out from any to any

pass out on $int_if from any to $int_net
pass in quick on $int_if from $int_net to $int_if

pass in on $int_if route-to \
{ ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
proto tcp from $int_net to any flags S/SA modulate state

pass in on $int_if route-to \
{ ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
proto {udp, icmp} from $int_net to any keep state

pass out on {$ext_if1, $ext_if2} proto tcp from any to any flags S/SA
modulate state
pass out on {$ext_if1, $ext_if2} proto {udp, icmp} from any to any keep
state

pass out on $ext_if1 route-to ($ext_if2 $ext_gw2) from $ext_if2 to any
pass out on $ext_if2 route-to ($ext_if1 $ext_gw1) from $ext_if1 to any

pass in on $int_if inet proto tcp from any to 127.0.0.1 port 3128 keep state
pass out on $ext_if1 inet proto tcp from any to any port 80 keep state
pass out on $ext_if2 inet proto tcp from any to any port 80 keep state

y en el squid.conf en la linea donde esta el puerto
dice
port 3128 agregale transparent

si tienes dudas, contactame personalmente, acabo de configurar un servidor
el dia de hoy, y esa configuacion me funciono,

Saludos

--
--~--~---------~--~----~------------~-------~--~----~--~---------~--~
God Bless You - S h a l o m
ISC. Esteban M. Herrera Olmedo
--~--~---------~--~----~------------~-------~--~----~--~---------~--~

Buenas tardes, puede ser una pregunta fuera de contexto, pero, en referencia al balanceo de cargas alguien ha tenido experiencia usando el servicio de rapidshare, tengo entendido que si utilizan la misma cuenta 2 ip's diferentes la banean.

Saludos y una disculpa si mi pregunta no encaja en el grupo.